MariFlex Mobile Vapour Recovery Unit MVRU 1100
The VCRS MVRU – 1100 tackles the ever present challenge to the petrochemical industry, especially tanker operators and barge operators, to comply with ‘green’ incentives and reduce emissions.
Especially trans-shipments between Sea-going vessels and Inland barges have been in the sights of Port authorities and Environmental agencies alike.
Sea going ships are inerted to less than 8% oxygen in their tanks. Barges are often not inerted, making them incompatible with inerted ships when vapour balancing. During transfers between ships and noninerted barges the MVRU – 1100 serves to capture VOC’s from the barge and control vapour emissions.
Specifications MariFlex MVRU – 1100
Unit size (l x w x h) : 6.060 mm x 2.440 mm x 2.590 mm
Unit weight (empty) : 5.800 kg.
Working capacity : Up to 1.100 m3 / hour
Inlet working medium : Liquid Nitrogen
Inlet working pressure : 10 – 20 Bar
Inlet temperature : -190°C.
Working temperature : Between -190°C. And -117°C.
Liquid N2 consumption : Approx. 1.000 liter per 1.100 m3 vapour
Vapour range : Hydrocarbon and Chemicals
Vapour excluded : N/A
Total VOC reduction : Up to 99,9%
Vapour inlet : 8 inch (NW200) or 10 inch (NW250)
Safety certificates : TEQ – USA
Safety equipment : Standard
Noise : < 72 dBA @ 1 meter
The MVRU – 1100 system handles up to 1100 Cu. M. per hour vapour, with a VOC removal efficiency of 99,9%. It is readily available from our warehouse in Rotterdam and can be transported by conventional means (it is the size and dimensions of a 20 feet TEU container). It can be prepared and mobilised in a matter of hours, making it an ideal partner for people planning trans shipments in environmentally sensitive areas.
The MVRU – 1100 is typically accompanied by one of our specialized Supervisors to ensure safe and experienced operation of the unit. Additional
associated equipment can also be hired from VCRS International. This project is supported by the “Zeehaven Innovatie Project“.