MariFlex IGG-2000 Inert Gas Generator

Home / MariFlex IGG-2000 Inert Gas Generator

MariFlex IGG 2000 Inert Gas Generator
The Lloyds certifed MariFlex Inert Gas Generator is designed/built in accordance with the regulations of IMO and is meant for shipboard use and outdoor operation. The Inert Gas capacity and composition is calculated at 100% atmospheric relative humidity with a combustion air and cooling water temperature of +25°C.

Pressures mentioned are effective working pressures with ±5% tolerance.
Temperature tolerance ±1°C.
Quantities tolerance ±3%.

The combustion chamber cooling water jacket is designed for a maximum overpressure of 1bar.

Specifications MariFlex IGG 2000
DIESEL ENGINE
Make/Type : Smit Gas Systems/ Gin – 0,15
Capacity : 2000 m3/h @ 0.15 bar
Gas composition (Based on dry gas)
Oxygen O² : 2-4 vol %
Carbon monoxide CO : max 500 ppm
Carbon dioxides CO² : max 14,0 vol %
Sulphur oxides SOx : max 500 ppm
Nitrogen N² : balance
Soot : 0 on scale Bacharach (Bacharach 0 = complete absence) N.B. at lower O² content CO content will increase.
Temperature : Aprox. 10°C above cooling water inlet temperature.
Dewpoint : Satured (at gas temperature)

Fuel : Clean automotive diesel (according EN 590).
Inlet Pressure : 0-0.4 bar
Consumption : Approx.162 kg/h
Electricity : Main supply system (System has be disigned for two different supply systems) 380V/3Ph/50Hz and 440V/3Ph/60Hz Combustion air fan motor
Rating : 35 kW
Consumption : 30 kW @ 50Hz (pulley SPA-100-4) : 34.5 kW @ 60Hz (pulley SPA-118-4) F.O.P motor
Rating : 0.9 kW
Consumption : 0.6 kW
Auxiliaries Rating : 3 kW
Consumption : 3 kW Cooling water
Consumption : 120 m3/h @ 25 mwc of filtered water mesh 4 mm at max. 32°C
Dimensions (l x w x h in cm.) : 310 cm x 180 cm x 1595 cm
Weight dry : Approx. 2600 kg.

 

Please contact us at Phone: +31 10 – 434 44 45
E-mail: info@mariflex.net
or our  contact form