MariFlex FiFi-750 Fire Fighting Unit
FiFi-750 unit, (750 m3/hr@12 bar/3250 GPM@180 PSI), based upon centrifugal pump directly coupled to flywheel side of diesel engine. Including a hydraulic pump to drive boost pump at the front side of engine, hydraulic oil tank, filter, cooler and thermostat. Unit is build on a light weighted aluminium skid including fuel tank suitable for installation on deck.
Total weight of one unit : 2500 Kgs.
Total dimensions of one unit (L x W x H) : 2400x1150x1900 mm 7.9 x 3.8 x 6.2 Ft.
Also available as containerised model.
Specifications MariFlex FiFi-750:
DIESEL ENGINE
Make/type : Deutz or Volvo diesel engine. charged marine diesel 4-stroke.
Rating : 420 kW @ 2000 rpm / 575 HP @ 2000 rpm, according ISO 3046.
Start system : Electric with battery, incl. battery charger for 220 V/50 Hz.
Fuel system : Basement integrated tank of 500 litres / 132 gallon. Sufficient for eight running hours.
Cooling system : Sea-water cooled heat exchanger is mounted on the engine and fed by a direct driven cooling waterpump. Suction via inlet of Fi-Fi pump.
Exhaust system : Sea-water cooled exhaust manifold, water injected and fed by engine’s cooling waterpump.
Safety system : Auto shut-down in event
– low lubrication oil pressure.
– high engine temperature
– over speed.
FIFI- 750 PUMP:
Make/type : Pioneer pump
Capacity/pressure : 750 m3/hr@12 bar/3250 GPM@180PSI NPSH at 2000 rpm : 4 mtrs. max.
Power consumption : 300 kW / 402 HP
Material casing : Nod. Cast iron GG40. Coated inside
Impeller : Stainless steel CA6NM
Shaft : Stainless steel 17-4-HP
Discharge flange : DN 200/PN 16 acc. to DIN 2633.
Suction flange : DN 250/PN 16 acc. to DIN 2633.
MONITOR:
Make/type : HR 377
Capacity : 12.000 ltr/min. / 3170 GPM max.
Inlet pressure : 12 bar / 180 PSI
Throw length : 130 mtr. / 426 ft. max. for water.
Working pressure : 16 bar / 232 PSI max.
Reaction thrust : 1000 Kgs. maximum.
Control : Manual.
Inlet outlt flange : DN 150/PN16 acc.to DIN 2633.
Swivelling range : horizontal: rotating infinite vertical: 120o total.
Material body/nozzle : SS 316.
Bore water nozzle : 73 mm.
FOAM INDUCTING SYSTEM
Type : PV600
Mixing ratio : 0.4 – 6%
Hose manifold 6 off : 2½” connections.
Please contact us at Phone: +31 10 – 434 44 45
E-mail: info@mariflex.net
or our contact form