MariFlex DHP 300 Diesel Hydraulic Powerpack Mobile Fire Fighting Equipment.
MariFlex Hydraulic Powerpacks are self-contained, extremely compact, light weight and built according to internationally recognized standards MariFlex builds these units to customer specifications.
Characteristics of all our Hydraulic Powerpacks:
• All components enclosed within a protection / lifting frame
• The protection / lifting frame is made from high tensile structural steel and is coated with a two component paint system
• A dashboard is incorporated in the protection / lifting frame to check and control the:
– Speed and Fuel level indicator
– Engine motor oil pressure
– Engine water temp. indicator
– Hydraulic oil temp. indicator
– Hydraulic level indicator
– Hydraulic pressure indicator.
Specifications MariFlex DHP 300
Maker : Deutz TCD 6.1 L6 T 4 F.
Type : Turbo charged, water cooled.
Emissie : Stage III or Stage IV final.
Rating : 180 Kw at 2300 rpm. DIN B 6270. Emissions EU Stage IV / stage V ready.
Start system : Electrical starter.
Exhaust system : Silencer / spark arrestor Discom.
Fuel system : Double filters, including water separator.
Fuel consumption : 30 ltr / hr.
Fuel tank capacity : 230 ltr.
Type : Axial plunger, with variable setting.
System : Open.
Flow : 280 ltr / min.
Pressure : 320 bar max.
Oil type : ISO 46.
Oil tank : 250 ltr. including filler/breather cap, drain and gauge glass.
Cooling : Air cooled, thermostat controlled and intergraded with diesel engine.
Filter : Full flow 10 micron, including magnet element and visual dirt indicator, by-pass at 1 bar.
Indicators / Protections : Hydraulic oil pressure /temperature. Dirt indicator hydraulic oil filter. Hydraulic pressure relief valve. Low level hydraulic oil tank High temperature hydraulic oil.
Design : Single stage centrifugal
Capacity : 3300 L/min – 80 mwc.
Viscosity/Specific gravity : 1.0 Cst. at 20 degr. /1.0.
Power consumption : 149 Kw
Materials casing : Seawater resistance aluminum.
Hydraulic motor : Built in axial plunger 125cc.
Hydraulic pressure : 320 max.
Hydraulic oil flow : 300 L/min max.
Discharge connection : Storz 6’’ N160
Weigth including floater : 125Kg.
Dimension (LxWxH) : 4240 x 1060 x1820 mm
Weight (dry) : 3100 Kg.